Insulation in Burbank, CA
Burbank homeowners call us most often about spray foam insulation, and for good reason: summer attic temperatures here routinely hit 150°F or more, and the 1940s-1960s stucco ranch homes that dominate the flatlands below the Verdugo Mountains were built with next to nothing in the walls. Proper insulation in Burbank isn’t an upgrade, it’s how you keep an HVAC system from running nonstop from June through October. Call (408) 837-7384 and you’ll get a live person, 24/7, who can schedule a free on-site estimate.
Why Burbank Homes Are Different
Burbank sits at the eastern edge of the San Fernando Valley, and its weather station at the airport is one of the hottest reporting sites in the entire LA metro, regularly hitting 100-108°F in summer. That’s 10-15°F hotter than the coast, and the sun on a stucco ranch with low-slope roofing turns the attic into an oven. What most homeowners don’t realize until we get inside is that pre-1970s construction here typically has zero cavity insulation. The stucco looks solid from the outside, but the drill bit hits nothing but air behind the lath.
Homes in the flatland neighborhoods near Victory Boulevard and the Rancho area tell the same story when we open a wall: empty stud bays. That’s the primary reason dense-pack cellulose retrofits and drill-and-fill jobs make up such a large share of our Burbank work. These houses also have crawl spaces that stayed uninsulated for seventy years, which means floors that feel warm in the afternoon and cold in the evening. On the commercial side, Burbank’s Media District and Olive Avenue corridor house the densest concentration of working production facilities in the country, and we regularly handle thermal and acoustic insulation for soundstages, ADR booths, and post-production offices. It’s a market that Glendale and Pasadena simply don’t have.
Our Main Burbank Services
Most Burbank homeowners reach out to us about two things first: attic insulation that can’t keep up with valley heat, and crawl spaces that leak moisture and heat into the home. Here’s what those jobs look like here.
Attic Insulation in Burbank
Attics in Burbank absorb punishing heat, and the older rock wool or fiberglass batts we find in 1950s ranches have usually settled or degraded below useful R-value. We pull temps before and after every attic job, and the difference a Attic Insulation in Burbank install makes is immediate: the upstairs rooms stop baking by late afternoon. Most attics here are blown-in cellulose at R-38 or better, with Owens Corning or Johns Manville fiberglass used where airflow paths need to stay open for ventilation upgrades.
Crawl Space Encapsulation & Vapor Barrier in Burbank
Burbank’s dry summers don’t protect a crawl space in winter, when groundwater and morning condensation push humidity through the dirt floor and into the floor joists. We’ll assess whether a Crawl Space Encapsulation & Vapor Barrier in Burbank job is what you need, and what it’ll take to stop the humidity at the source. A properly sealed crawl space changes the feel of the whole house: warmer floors, fewer dust mites, and lower cooling load upstairs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Spray Foam Insulation in Burbank
Spray foam is the answer for Burbank attics that turn into 150°F ovens and for any room that never quite cools down in summer. In a 1950s stucco ranch where the ceiling joists are exposed and the ducts run through the attic, closed-cell foam seals the thermal envelope while it insulates, which cuts both heat gain and air leakage at once. Our crews trained on Icynene and Demilec systems, so you get a Spray Foam Insulation install that’s done right the first time, backing by the Done Right Promise for life.
Open-Cell Spray Foam
Signs you need it
You hear every footstep from the floor above, or your second story never cools below 80°F on a 100°F Burbank afternoon.
What it costs in Burbank
Open-cell foam runs $1.20-$2.50 per board foot installed in Burbank attics and interior walls.
How we do it
We seal gaps and penetrations, mask off the work area, spray the foam to spec, and trim it flush once cured.
Closed-Cell Spray Foam
Signs you need it
Your roof deck radiates heat into the attic, or you want the highest R-value per inch and an air seal in one pass.
What it costs in Burbank
Closed-cell foam costs $2.50-$4.50 per board foot installed, depending on depth and accessibility in Burbank roof decks.
How we do it
We inspect the deck, seal the soffit vents where required, apply foam in lifts to target R-value, and verify adhesion and thickness.
What Spray Foam Insulation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Open-cell spray foam | $1.20-$2.50 per board foot |
| Closed-cell spray foam | $2.50-$4.50 per board foot |
| Full attic spray foam (1,000 sq ft) | $4,500-$9,000 |
Is spray foam worth it in Burbank’s climate?
Yes. With attic temps hitting 150°F and summer highs above 100°F, the air-sealing plus insulation value of closed-cell pays back fastest here. You’ll see the difference in your Burbank cooling bill within the first summer.
Can you install spray foam in an older Burbank attic?
In most cases, yes. We inspect the roof deck, wiring, and ventilation first, because 1940s-1960s framing occasionally needs baffles or venting changes. Call us for a same-day assessment.
Blown-In Insulation in Burbank
Blown-in insulation is the workhorse retrofit for Burbank’s older stucco ranches, which almost never had wall cavities filled at construction. We blow either cellulose or fiberglass into empty stud bays and attic floors, which changes a house from oven-cool to actually comfortable the same day. Brands we install here include GreenFiber and Johns Manville, and our Blown-In Insulation crews handle dense-pack wall retrofits with the least mess we can manage, which in a 1950s Burbank home means covering floors and cleaning up after ourselves.
Blown-In Cellulose
Signs you need it
Your attic floor has a thin, settled layer of old insulation, or the walls feel hollow when you knock on them.
What it costs in Burbank
Blown-in cellulose runs $1.00-$2.00 per square foot installed in Burbank attics, including prep and cleanup.
How we do it
We air-seal the attic floor, mark depths, blow cellulose to R-38 or R-49, and document the final R-value.
Dense-Pack Wall Insulation
Signs you need it
Your 1940s-1960s stucco walls have no insulation, and rooms heat up fast even with the AC running.
What it costs in Burbank
Dense-pack wall retrofits run $2.50-$5.00 per square foot of wall area in Burbank, depending on access and siding.
How we do it
We drill 2-inch holes through stucco or drywall, blow cellulose at high density into the bays, and patch to match.
What Blown-In Insulation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Attic floor, blown-in cellulose | $1.00-$2.00 per sq ft |
| Dense-pack walls | $2.50-$5.00 per sq ft |
| Whole-house air sealing + attic blow | $3,000-$6,500 |
How long does blown-in insulation last in Burbank?
Cellulose and fiberglass both last the life of the home when the attic stays dry and pests are excluded. Burbank attics stay dry year-round, so the main threat is rodents, which is why we offer attic proofing alongside insulation jobs. Call to bundle both.
Can you top up old insulation instead of removing it?
Yes. If the existing material is dry, uncontaminated, and below current R-value, we’ll blow a layer of GreenFiber or Johns Manville on top. We also air-seal the floor first so the new insulation actually performs. Call us for an assessment.
Radiant Barrier Installation in Burbank
With Burbank regularly posting 100°F-plus summer days and attic cavities hitting 150°F, a radiant barrier is one of the highest-payoff upgrades a homeowner can make. It reflects heat before it ever soaks into the insulation, which means the AC doesn’t have to fight a radiator above your ceiling all afternoon. Our Radiant Barrier Installation crews install foil-faced barriers in attics across the flatlands and the hillside neighborhoods above the 134.
Attic Radiant Barrier
Signs you need it
Your upstairs rooms don’t cool down until after midnight, or the attic door is hot to the touch by 3 p.m. in summer.
What it costs in Burbank
An attic radiant barrier runs $1.50-$3.00 per square foot installed in Burbank, depending on roof pitch and access.
How we do it
We staple or secure foil to the underside of the roof rafters, leaving a breathing gap at the ridge and soffits.
Radiant Barrier Roof Deck
Signs you need it
You’re re-roofing anyway, and the deck gets direct sun from mid-morning to sunset on a Burbank summer day.
What it costs in Burbank
Roof deck radiant barrier under new roofing adds $1.00-$2.50 per square foot to the reroof cost in Burbank.
How we do it
We lay the barrier foil-side down over the deck before underlayment, then coordinate with your roofer on schedule.
What Radiant Barrier Installation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Attic radiant barrier | $1.50-$3.00 per sq ft |
| Roof deck radiant barrier | $1.00-$2.50 per sq ft |
| Radiant barrier + attic airflow upgrade | $2,500-$5,000 |
Does radiant barrier work with blown-in insulation in Burbank?
Yes. The barrier handles the radiant heat from the roof, while blown-in insulation handles conductive heat from the attic air. Together they bring a Burbank attic down 20-30°F in summer. Call us to see both options for your house.
Will a radiant barrier help in winter in Burbank?
It helps more in summer, but by keeping attic heat from radiating through the ceiling, it reduces the AC’s peak load in the afternoon. Burbank winters are mild enough that heat loss isn’t the primary concern. Estimates are free.
Insulation Removal & Replacement in Burbank
Some Burbank attics have seventy-year-old insulation that’s been trampled, soaked by a roof leak, or turned into a rodent latrine, and the answer is removal before anything else. We remove old, contaminated, or failed insulation with vacuum systems built for the job, then replace it with modern material at current code. That’s the Insulation Removal & Replacement work we do regularly in pre-1970s Burbank houses where the original material is beyond saving.
Attic Insulation Removal
Signs you need it
Your attic insulation is thin, compressed, or damp, or a pest inspection flagged contamination or nesting.
What it costs in Burbank
Attic insulation removal runs $1.50-$3.50 per square foot in Burbank, including bagging and haul-away.
How we do it
We set up negative-pressure vacuums, remove the old material, seal and sanitize, then dispose per LA County rules.
Contaminated Insulation Removal
Signs you need it
You smell a musty or ammonia odor from the attic, or you’ve had rats, mice, or raccoons in the space.
What it costs in Burbank
Contaminated removal, including sanitizing and deodorizing, runs $2.50-$5.00 per square foot in Burbank.
How we do it
We suit up with PPE, remove all contaminated material, fog the space with an enzyme-based sanitizer, and replace insulation after inspection.
What Insulation Removal & Replacement Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Attic insulation removal | $1.50-$3.50 per sq ft |
| Contaminated removal + sanitizing | $2.50-$5.00 per sq ft |
| Removal + new blown-in replacement | $4,000-$8,500 |
How do I know if my Burbank attic insulation needs replacing?
If it’s compressed below R-value, wet or stained, smells, or shows rodent tunnels and droppings, it needs to come out. We’ll inspect and give you a straight answer. Call us for a free attic assessment.
Can you remove insulation the same day in Burbank?
In most cases, yes. A standard attic removal takes one crew a full day, and we can often schedule replacement for the following day. Live phone answers mean you’ll have a date right away.
Attic Air Sealing in Burbank
Air sealing is the step that makes insulation perform, and in Burbank’s older ranches it’s almost always needed. Gaps around top plates, can lights, duct boots, and the attic hatch let conditioned air escape and attic heat pour in, which wastes the insulation you paid for. The Attic Air Sealing work we do in Burbank starts with finding every leak, then closing them with foam, caulk, or mastic for a measurable difference in comfort and bills.
Attic Floor Air Sealing
Signs you need it
Your AC runs constantly on hot Burbank afternoons, and rooms still feel stuffy even with the thermostat set low.
What it costs in Burbank
Attic floor air sealing runs $1.00-$2.50 per square foot of attic in Burbank, depending on how many penetrations need closing.
How we do it
We pull back insulation, seal every joint, chase, and penetration with foam or caulk, then blow insulation back to spec.
Top Plate & Penetration Sealing
Signs you need it
You can see daylight or feel a draft around plumbing vents, wiring holes, or the top of interior walls from the attic side.
What it costs in Burbank
Top plate and penetration sealing typically runs $800-$2,000 for a whole Burbank attic, based on leak count.
How we do it
We locate every top plate gap and penetration, foam them, and verify with a smoke pencil before reinsulating.
What Attic Air Sealing Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Attic floor air sealing | $1.00-$2.50 per sq ft |
| Top plate & penetration sealing | $800-$2,000 |
| Air sealing + blown-in insulation combo | $2,000-$5,000 |
Can air sealing alone reduce my Burbank cooling bill?
Yes. We’ve seen attics where a third of the ceiling had unsealed gaps, and closing them cut cooling load by double digits. It also keeps dust and pollutants out. Call us for a blower door test to quantify it.
Is attic air sealing safe for my older Burbank home?
Yes, when done by a trained crew. We use fire-rated foam and sealants appropriate for existing construction, and we check that ventilation is still adequate before we finish. Our technicians are background-checked and uniformed.
Wall Insulation in Burbank
The single most common wall problem in Burbank is a 1950s stucco ranch with empty stud bays, and that’s exactly what our Wall Insulation retrofits fix. Injection foam and drill-and-fill cellulose both work through small holes that we patch to match, so the outside of the house doesn’t end up looking like Swiss cheese. This is also where we handle interior wall soundproofing for homeowners near the Media District and the studio corridors who want a quieter house.
Injection Foam Wall Insulation
Signs you need it
Your walls feel cold in winter and radiate heat in summer, or a neighbor’s unit is too easy to hear through the wall.
What it costs in Burbank
Injection foam runs $3.00-$6.00 per square foot of wall area in Burbank, including patching to match.
How we do it
We drill small holes through stucco or drywall, inject foam at controlled pressure, and patch each hole to blend with the finish.
Drill & Fill Wall Insulation
Signs you need it
You have a pre-1970s Burbank home with empty wall cavities, and the rooms heat up too fast in the afternoon.
What it costs in Burbank
Drill and fill with cellulose or fiberglass runs $2.50-$5.00 per square foot in Burbank walls.
How we do it
We drill access holes from outside or inside, blow the material dense enough to prevent settling, and patch to match the surface.
What Wall Insulation Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Injection foam walls | $3.00-$6.00 per sq ft |
| Drill & fill walls | $2.50-$5.00 per sq ft |
| Interior wall soundproofing | $4.00-$8.00 per sq ft |
How messy is wall insulation retrofitting in a Burbank home?
Less messy than most people expect. We use dust shrouds on drill equipment and clean up as we work. We also patch holes to match paint or stucco texture. Call us to walk through the process for your specific walls.
Can wall insulation help with noise from Burbank streets?
Yes, especially injection foam or cellulose in the exterior wall cavities. Homes near Victory Boulevard or the 134 on-ramps get a noticeable reduction in road noise. We can discuss acoustic options during a free estimate.
Attic Cleaning & Rodent Proofing in Burbank
Burbank attics are a magnet for roof rats and mice, and the older the house, the more entry points it has: roof vents, eave gaps, and unsealed chases. We remove the mess rodents leave behind, sanitize the space, and close every entry point so they can’t come back. That’s the full scope of our Attic Cleaning & Rodent Proofing service, and it’s the only way to protect new insulation from being ruined the same month it goes in.
Attic Cleanout
Signs you need it
You see droppings, nesting material, or shredded insulation in the attic, or you hear scratching at night.
What it costs in Burbank
Attic cleanout runs $500-$1,500 in Burbank for a typical 1,000-1,500 sq ft attic, plus disposal fees if needed.
How we do it
We bag and remove all contaminated material, vacuum the space, and haul everything for proper disposal.
Rodent Proofing & Exclusion
Signs you need it
You’ve had rodents return after a one-time cleanup, or you can see gaps at vents, eaves, and the roofline from outside.
What it costs in Burbank
Rodent proofing runs $800-$2,500 in Burbank depending on how many entry points need sealing and what materials are needed.
How we do it
We seal gaps with steel mesh, foam, and flashing, install vent guards, and leave no opening bigger than a dime.
What Attic Cleaning & Rodent Proofing Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Attic cleanout | $500-$1,500 |
| Rodent proofing & exclusion | $800-$2,500 |
| Full cleanout, proofing, and new insulation | $5,000-$10,000 |
Do I need to replace insulation after a rodent problem in my Burbank attic?
Almost always. Rodent urine and droppings contaminate insulation and create a health risk, and nesting compresses the material so it stops performing. We can bundle removal, sanitizing, proofing, and replacement into one job. Call us for a package quote.
How do you keep rats from coming back in Burbank?
By sealing every entry point at the eave, vent, and roofline, and by removing the nesting material and scent trails. Rat pressure in Burbank is year-round, so exclusion is the only long-term answer. Our proofing is backed by the Done Right Promise.
Home Energy Audit in Burbank
A home energy audit in Burbank starts with a blower door test to measure how leaky the house is, then adds thermal imaging to find exactly where insulation is missing or failing. That combination is the most honest way to see why a 1950s ranch near Victory is costing twice what it should to cool. Our Home Energy Audit includes a written report with priorities, so you can actually act on the findings instead of guessing.
Blower Door Test
Signs you need it
Your Burbank energy bills spike every summer, or you feel drafts in rooms even with windows closed.
What it costs in Burbank
A blower door test runs $250-$500 as a standalone in Burbank, or it’s included with a full home energy audit.
How we do it
We seal a fan into an exterior door frame, depressurize the house, and measure cubic feet per minute of leakage.
Thermal Imaging Inspection
Signs you need it
Rooms heat unevenly, or you suspect missing insulation in certain wall cavities but can’t confirm it.
What it costs in Burbank
Thermal imaging is $200-$400 as a standalone scan in Burbank, or bundled into a full audit.
How we do it
We scan walls, ceilings, and floors with an infrared camera to map hot and cold spots, then document findings in the report.
What Home Energy Audit Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Blower door test | $250-$500 |
| Thermal imaging scan | $200-$400 |
| Full home energy audit | $600-$1,200 |
Is a home energy audit worth it for a house built in the 1950s in Burbank?
Yes, and it’s usually the quickest way to find the biggest savings. Older Burbank houses almost always have air leaks and missing insulation, and an audit shows exactly which fixes will pay back fastest. Call us to book one.
How long does an energy audit take in Burbank?
A full audit with blower door and thermal imaging usually takes two to three hours for a standard ranch. You’ll get the written findings same day. We answer the phone 24/7 if you want to schedule.
Brands We Service in Burbank
We install and service insulation from Owens Corning, Johns Manville, GreenFiber, and Knauf, with material staged for Burbank jobs. Turnaround on parts and product is same-week for most local jobs, and our our brands page shows what we stock and why we trust these manufacturers.
Pricing for Insulation in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Open-cell spray foam | $1.20-$2.50 per board foot |
| Closed-cell spray foam | $2.50-$4.50 per board foot |
| Blown-in attic insulation | $1.00-$2.00 per sq ft |
| Dense-pack wall insulation | $2.50-$5.00 per sq ft |
| Attic radiant barrier | $1.50-$3.00 per sq ft |
| Insulation removal | $1.50-$3.50 per sq ft |
| Attic air sealing | $1.00-$2.50 per sq ft |
| Wall injection foam | $3.00-$6.00 per sq ft |
| Rodent proofing & exclusion | $800-$2,500 |
| Home energy audit | $600-$1,200 |
What pushes a Burbank price up is usually access: tight attic hatches, steep roof pitches above the Verdugo foothills, or walls that require interior drilling because the stucco patch would be visible from the street. Every quote we give is upfront and line-item, with no trip charge in our county and a free second opinion on any written estimate.
Neighborhoods We Serve in Burbank
We work all over Burbank, and our crews know the differences between the flatland ranches and the hillside streets above the 134. We respond to most Burbank calls same day or next morning.
- Victory Boulevard area
- Rancho neighborhood
- Media District
- Magnolia Park
- Burbank Hillside
Service Area - Cities Near Burbank
We also serve homeowners in nearby communities, including San Martin, CA, Morgan Hill, CA, Scotts Valley, CA, and Los Gatos, CA. If you live just outside Burbank, call us and we’ll confirm coverage and schedule. The one down the road is the one who answers the phone.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Insulation in Burbank
Most Burbank calls get same-day or next-morning service, depending on the job. The phone is answered live 24/7, so you’ll know your schedule immediately, not after a callback. Call (408) 837-7384 and we’ll confirm a time right then.
Most insulation, air sealing, and radiant barrier work in Burbank does not require a permit, but we confirm code requirements for your specific project before starting. If a permit is needed, we’ll handle the paperwork. Ask us during the estimate.
Yes. We work the flatlands, the hillside lots above the 134, and everything in between. Our crews are familiar with Burbank’s older stucco homes and the access challenges some properties present. We’ll give you an honest answer on timing when you call.
Call (408) 837-7384 for a free insulation estimate in Burbank today. A live person picks up, whether it’s noon or midnight, and the quote comes to you upfront, with no runaround and no trip charge in our county.
What happens when you call
- 1A real person answersNo phone trees - talk to a local insulation pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 1-hour.
- 4You approve before work beginsNothing starts until you say go.
What Burbank Customers Say
"The house had rats in the attic insulation and a smell we could not place. Walt's crew pulled all of it, sealed the gaps where they were getting in, sanitized, and put in new blown-in. He sent photos of the sealed openings so I could see it done."
- Rosa Delgado"Walt came out himself, stuck his head in the attic, and told me I had about four inches where I needed fourteen. No sales pitch, just the number and what it would cost to fix it. Crew was here two days later."
- Carl Meadows"Crawl space was wet every spring. They laid the heavy liner, sealed the vents, and put a dehumidifier down there. Floors are warm and the moisture meter he left reads fine now. He still answers when I text him a reading."
- Devon Pierce